<strong id="nsfna"></strong> 
1. By vibration simulation analysis, we can get the stress and the highest of stress speed of each part.
2. Then, unified computing with the fatigue life of the material, we can judge if the chosen material is qualified to the resistance requirements.
| Vibration Frequency(Z) | Power Density Spectrum |
| 10 | 0.208 |
| 55 | 0.0677 |
| 180 | 0.0026 |
| 300 | 0.0026 |
| 360 | 0.00146 |
| 1000 | 0.00146 |
| No. | Part Name | Material | Density | Elasticity Modulus | Tensile Strength | Poisson's ratio |
| 1 | Lens | PC | 1200 | 2400 | 67 | 0.3 |
| 2 | Reflector | PC | 1200 | 2400 | 67 | 0.3 |
| 3 | Housing | PP+TD20% | 1040 | 1800 | 20 | 0.3 |
| Part | Stress(MPa) | Stress(MPa) | Actual cycle number | Damage | Total damage |
| Lens | 1σ(0.74) | 1.64E24 | 5.32E7 | 3.24E-17 | 7.14E-13 |
| 2σ(1.48) | 5.69E20 | 5.24E7 | 9.21E-14 | ||
| 3σ(2.22) | 5.39E18 | 3.35E6 | 6.22E-13 | ||
| Housing | 1σ(0.62) | 1.15E19 | 1.25E8 | 1.08E-11 | 2.09E-07 |
| 2σ(1.24) | 4.01E15 | 5.05E7 | 1.25E-08 | ||
| 3σ(1.86) | 3.79E13 | 7.93E6 | 2.08E-07 | ||
| Reflector | 1σ(1.84) | 4.66E19 | 4.86E7 | 1.04E-12 | 2.13E-08 |
| 2σ(3.68) | 1.61E16 | 2.11E6 | 1.30E-09 | ||
| 3σ(5.52) | 1.52E14 | 3.06E6 | 1.99E-08 |
The total damage of reflector , housing , lens is less than 1, so the fatigue damage will not happen
Tel:+ 86-576-84203933
Fax: +86-576-84203922
Email:djcn@djcn.com.cnAdd:No. 25, Chaoyuan Road, Xinqian Development, Huangyan, Taizhou, Zhejiang
Company Profile
Memorabilia
Honor
Benefit
Headlight Mould
Rear Light Mould
Light Guide Mould
BMC Reflector Mould
Mould Design
Optical Design
Mold flow analysis
Thermal simulation
Vibration simulation
Equipment
Quality Control